Search results for query: *

I have a 94 and a 06 Dodge diesel trucks, do they really need two batteries? I can get 900 cca 3 year battery from WalMart. Opinions?

my dad passed before Xmas and I got his 1994 Dodge 2500 2 wheel drive diesel-auto, it has 109,000 miles on it and always under a roof. Has a nice camper top on it from the start. Not sure what it’s worth but it seems they’re low balling the appraisal at $2000 (which is ok to me not having to...

I just inherited my dad’s 94 Ram 2500. Drove it back to Va from Sc today, temp outside was 52 when I left and 33 when I got home. Gauge never got above 150-165 with cool air out the vents. Was thinking at first either vacumn not opening the heat valve or core was clogged. The two heater pipes...

1988 Dodge 100 lights. I've turned the switch as far up it goes but the dash lights are still on the dim side, AC-heat controls next to dash is bright (separate I’m sure) switch, bad ground or connector on back of dash? Ideas? Also the oil pressure and gas gauges read low

What most wrongly call a proportional valve. Can they still be bought new (1988 Dodge) or do I have to scrounge one from the yards?

I have a 1988 Dodge pickup 318 engine. Gauge in dash would hardly move off bottom so I put a hard line oil pressure gauge and it read 40-60 pounds idle so I changed out the sending unit. Still very little movement on dash gauge, bad gauge or wiring? Oil light does go out after starting, pulled...

Looking for a fixer upper 30s 40s 50s or 60s, prefere a full cab

I’m parting out a 79 Ram Charger body, keeping the drive train. It’s rough other than the hatch back top piece. Ok doors, fenders and hood. No grill. If no interest it’s all going to scrap yard in 2 weeks. In eastern Va. no shipping, cheap

hope this is the right spot to ask question, looking for a shortbed frame or rear frame section around spring perch for a 79 Lil red Dodge. Thanks

What I’m looking for is the tilt steering exploded view of the low-high beam rod next to ts lever. I took mine apart but can’t get it back. My 88 SM (early) book still shows the switch in floor. Thanks

I need the turn signal-wiper arm for a 1988 dodge pickup with cruise, I picked up the other pieces but the doner truck was missing the steering column. Message me here.

I want to use the 42RE in my 87 and I’m looking for the wire harness from the newer pickups to do this changeover. An electric speedo is needed to, maybe the whole dash too, pm me here please

I have a 79 Dodge and it has some rust at the front hanger on rear axel. Should I get a section of frame or can I use strips of 1/4” plate. I’ve heard how not to weld but willing to hear advice. Not an everyday vehicle but I don’t want it cracking going down the road either. Thanks in advance...

I can get my hands on a 4x4 1987 complete frame-axles and was thinking of using the cab and bed off my 88 2x4 truck, just switching over the parts. What auto trans and transfer case would I look for (I want the manual selector on transfers case for the 4x4). Do I need Anything else?

Got trans back in my 01 Ram Van, works fine but gas millage dropped from 15 down to 11 mpg (checked over 3 tank fulls). Seems to run ok but maybe a little down on power, any thoughts? My dash keeps saying no bus, could the PCM be going bad?

I’m picking up a 94 van with a 9-1/4 rear axel. The axels have the 5 on 5 bolt spacing and my 79 has 4-1/2 spacing. Can I get axels with the smaller bolt pattern for this 9-1/4? Or just drill the axel for the 4-1/2 size? 79 has the 8-1/4 now.

Anyone have a 1988 fsm to copy me some wiring pics for under dash and in engine compartment repairs, previous owners did some chopping and I need some info. Leave me a message if you can help me out. 5.2- 904

Got a question for the experts. If I put a turbo on this engine how do I add to add more fuel since more air will be going in? Will the normal fuel injection pump be enough?

I missed the one guys pan for sale that he had for sale last year (too late as usual) so I’m still looking for one, pan-pickup-dipstick and tube to fit 2x4 79 truck.

I want to use the trans out of a 01 pickup in my 79 IF there’s something made aftermarket to get it to work. Anything out there? Also have a trans out of a 92 which ever would be better.