Lets see your Dodge trucks! Post some Pic's!

[DodgeAddict]

My 77 CrewCab that's for sale

 

[jumbreit]

Here's the before and current of my 1979 Lil Red Express project, 1 year into a full tear-down.

 

[BobK]

Here are mine. 2012 Dodge Ram 2500 & 66 A-100

 

[toolmanmike]

Here's my two, a 2000 and newly aquired 96. I took the topper off the 96 to install a tonneau cover and pulled up the green shag carpet and look what I found......nothing but unmolested paint. Both trucks are 3.9/autos. tmm

 

[woodchip]

These are the three trucks at my house....

 

[bear]

View attachment 1571View attachment 1572View attachment 1573

All I got to say "Woodchip" is NICE ! VERY NICE ! Time's three ! lol

 

[74360DUSTER]

heres a shot of my 2001 6spd cummins quad cab. has 5in straight exhaust, 150hp injectors, air dog fuel system, hx40 turbo. makes tons of power and a blast to drive and also is a shot of my 81 swb 833 4spd dodge ram i've had for 17 yrs. i bought it when i was 14yrs old.

 

[74360DUSTER]

Here's the before and current of my 1979 Lil Red Express project, 1 year into a full tear-down.
View attachment 1537
View attachment 1538

how did you lower the front and the rear. flip rear and heat front?

 

[jumbreit]

Well actually...the cab and bed are just sitting on the frame, which is on jackstands because the suspension is sitting in the garage for sanding and coating. The wheels, are just sitting in the wheel-wells. I'm thinking at this point I don't want to lower it.

After I got the replacement cab, I wanted to see how it would fit together since it's an '86 cab (and a '76 bed). I was mostly concerned that the doors wouldn't fit. These later model cabs are nice because they used plenty of galvanized steel for the floor and rockers.

I've got a thread started to document my resto...http://www.fortrucksonly.com/truckf...-1979-Dodge-Lil-Red-Express-Truck-Restoration

 

[74360DUSTER]

i like the stance. i would like my red one on post above to have that stance. it used to be a 78 stepside like yours. i gave away the rust free step side bed which is now on a lifted 79 ford truck. lol
i also upgraded to the 81 cab and clip along with the 86 bed.

 

[lou3500]

My 98 3500 was totaled by fire a few months ago,this is her replacement tho not a diesel.One owner 119,000 mile, 2001 ram 1500 sport 5.9 V8/auto 4x4 short bed,CAI,single chamber catback duals,tonneau cover,rims w kumho tires.

 

[gray07]

Sweet truck.

 

[Powerflite]

This is my '57 D200 flatbed dually. It has the original 315 poly motor & 4 speed with 4.10 gears. I rebuilt the bed using Malaysian hardwood and 1/8" steel plate over 3/4" birch plywood with tie-down straps all around. I am building a 354 hemi industrial/marine motor for it and have a divorced gear vendors overdrive as well.

 

[j-miller]

This is my '57 D200 flatbed dually. It has the original 315 poly motor & 4 speed with 4.10 gears. I rebuilt the bed using Malaysian hardwood and 1/8" steel plate over 3/4" birch plywood with tie-down straps all around. I am building a 354 hemi industrial/marine motor for it and have a divorced gear vendors overdrive as well.

Oh my I love this truck!!! I want to have my bed made about the same as your's for my 1970 D300.

 

[Powerflite]

Thanks for the kind words .

I didn't want to see a lot of the hardware like on newer builds so I used flathead screws from the inside, and the old pockets are so tight that I haven't needed the upper panel connectors. The tight pockets make it more difficult to remove the panels, but I'm not taking them out everyday so I am happy.

 

[gray07]

That truck is sweet

 

[alan627b]

Here is my 1997 3500 dually.. Cummins, 5 speed, Dana 80 with a 3.54 open (yay) rear. The front bumper is one from LMC with fog and driving lights. Picked up a set of used Sport type mirrors and the Sport headlamp assemblies this last weekend from local upullit yards for cheap. Had the pump rebuilt and custom assembled injectors installed and now it runs like it's supposed to! Thanks to Stan at the Red Oak Diesel Clinic in Red Oak Iowa.
Bought it this spring for around $6K and now have about $10K in it and should be stone axe reliable, like my 93 D350 dually was.
Other future plans include getting rid of the cheesy fake hood scoops the previous owner installed and replacing the missing wheel caps somebody stole before I bought it. Also some sound system upgrades for greater driving enjoyment.
Glad to be here on the forum!
Alan

 

[mopar350]

my truck project

i just got the 84 black d150 last month. going to transfer my 87 d250 parts on to it. just didn't want to be left out. lol ever one is having to much fun. and a lot of nice trucks out there.

 

[gray07]

Nice trucks

 

[Arthur]

I have another cab and 37 Dodge truck chassis with the front fenders and hood for anybody looking to build a rat rod. I even have a title for it.