Recent content by MoparsOnly

Thanks for the info, I did find a 1" to 2" micrometer (I thought I didn't have one) One axle Is good and one Is most definitely bad came in at 1.5975. doesn't look to bad but it is. Now I have to figure out if I have a HD axle or SD.

Hey yall got a quick question does anyone know what the thickness (diameter) of the axle is on a 9.25 dif in a 98 1500 is. You know the area where the bearing and seal are. Mine was growling pretty good and I want to know If the axles are any good or do I have to replace them. TIA!

Well, got the pan down nothing loose but did find the flex-plate bolts finger tight. So my thought sound traveled into pan made it sound a whole hell of a lot worse than it was. Still want to change out the kegger and 2 barrel TB for something better. Like an eddy air gap with a 4 bbl TB.

Thanks. You say "if I keep the stock ECU" are there after market ECU's

I got a 98 ram with a 5.2 and It's developed a noise in the oil pan sounds like something lose or maybe a bolt. It's not knocking and I'm In process of taking the pan down to get eyes on It. Okay I have a 410 stroker that I'm in process of getting together. I was wondering If I could stab It In...

Let me look at what I have and I'll let you know if that part # is useable.

OK dokey thanx

So I checked the dizzy and It's pretty much spot on. My neighbor has a good scanner. Should I use the sync function to get It perfect or what?

Thanks for the info. I'll have to check my dizzy position. I should have never got this truck everything Is a PIA to do, cab forward sucks. With the money got Into this thing I could have had my 77 just about done. With none of this crap to worry about.

way doggy, won't even break the rear tires loose.

I was thinking injectors are to small.

No I haven't was told by Hughes that I wouldn't need one with the cam I choose.I'm not looking for a race car I just want It to run right

OK just did a fresh rebuild on the 318: 30 over, 9.5+ compression, Ported heads, Ported/modded kegger intake, Hughes cam-208I/214E @.050-523I/533E. Profrom 1.7 Rocker arms, modded throttle body. Ignition system all new: Brass cap & rotor, Pick up coil, Taylor wires, HO coil, NGK plugs. From a...

Is It me or can people not read anymore. Your suppose to have a price to post In here.

Awesome thanx for the Info.