Oil pressure sending unit for a 1953 International R110 Silver Diamond 220 ci 6cyl engine

[d50driver]

Does anybody know what oil pressure sending unit available today works with the original equipment oil pressure gauge?

 

[multimopes]

Welcome aboard from NJ. I would try an auto parts store like NAPA. Just be wary as I got a replacement for my aftermarket oil pressure gauge and it was directly opposite of what I needed! Good Luck!

 

[d50driver]

I tried NAPA, but they did not have anything to recommend as workable.

 

[65 sporty]

Do you have a pic of yours?

 

[d50driver]

Yes. I will figure out how to post it.

 

[99Ram]

Welcome

 

[d50driver]

Hi, 65 sporty, I am having trouble uploading photos. Will continue working on it. In the meantime if you want to give me your email address, I can forward to you the photos from my email for you to see and maybe you can upload them to this forum while I am trying to figure out how to do that.

 

[d50driver]

see pictures posted on the Sunday, 10:52 am, message.

 

[65 sporty]

I saw your pic's

This one looks like yours, but it's for Fords

1949-1953 Oil Pressure Sending Unit - Ford & Mercury With Stock Gauges

The oil pressure sending unit serves a crucial role in any 1948-1955 Ford Pickup's engine, helping you monitor the amount of oil pressure in your engine and helping you save yourself from costly repairs should the oil pump malfunction. At MAC's Auto Parts, we want to see your 1948, 1949, 1950...

www.macsautoparts.com

Here is IH part, newer though

Oil Pressure Sender For ALL IH Engines w/ Oil Pressure Gauge

Check out the deal on Oil Pressure Sender For ALL IH Engines w/ Oil Pressure Gauge at IH Parts America

www.ihpartsamerica.com

Another that covers newer IH

Ecatalog

www.bwdbrand.com

Universal sender

Datcon Oil Pressure Sender 80 psi 0-90 Ohm 02504-02

Buy Datcon Oil Pressure Sender 80 psi 0-90 Ohm 02504-02 for less at PARTDEAL.com. Wholesale pricing.

www.partdeal.com

A universal sender would work if you knew the ohm range and max psi, yours says 80 on the flat and what I have seen in the past that is the max psi.

 

[d50driver]

I am told by the instrument shop that the ohm range on my original gauge is: idle - 150 and run - 10. See picture of gauge face earlier in this chain.