Looking for swaybar attaching hardware 72-80 Dodge Truck

[muskote]

Looking for the hardware that attaches the swaybar ends to the strut rods on 2wd.
Need 4 pieces of that to serve 2 vehicles...
Have never seen any reproductions. If anybody knows a place who sells repros or has some original laying around,
just let me know... !!

 

[jumbreit]

Yeah, those are the last pieces to the puzzle for me. I've been looking for two of them as well and would rather not have to purchase a whole swaybar kit. Addco has a set you can find on ebay (http://www.ebay.com/itm/Addco-134-Front-Performance-Anti-Sway-Bar-Stabilizer-Kit-/3807777826320), but I'm not sure how they attach.

Jason

 

[jumbreit]

I've checked the Addco site and found the installation instructions for installing that swaybar (http://addco.s3.amazonaws.com/wp-content/uploads/2012/03/134.pdf). Unfortunately, the endlink holes in their swaybar are positioned differently than stock.

 

[muskote]

Unfortunately, the endlink holes in their swaybar are positioned differently than stock.

Thanks Jason !
Yes, you´re right. The originals are horizontally and the aftermarket look to be vertically orientated.
But, at least, it gives an idea on how to build something to solve the problem... :thumb:

Maybe i will use some connecting rods from the car type sway bars to keep the dampening functionality and extend them for attachment to the strut rods.

But still, if somebody has some originals or knows where to find some, let me know.

Thank you, Jens