I have a crossmember from an unknown Dodge later truck in my 75 D100, it bolts in. I suspect it's from a 90-95 ish truck. Clears my 518 with everything together. I need the bracket to attach it all. I'm figuring there's a factory bracket for the mount that bolts in the cast bolt bosses in the trans? Anyone have knowledge of bolt in parts?
A518 in a 75 D100
- Thread starter Demonic
- Start date
captainchrysler
Well-Known Member
There is one in there, kinda flatish. After putting that trans in my 73 and fighting with cross-member issues I think you can use the factory cross-member with the original trans mount reversed. (leans back instead of forward). There's not much difference in that mounting point.
captainchrysler
Well-Known Member
This one? I can't remember if this is from and automatic or a 5 speed.
captainchrysler
Well-Known Member
That single bolt goes through the mount/insulator.
I'm aware. It's similar to the 75 2WD 727 mount. I'm not sure if it works with the later crossmember I have. It bolts in the same as the 727 original one, aside from the right side brace. The original 727 crossmember doesn't clear a 518 in the park rod section of the casting. I'd like to find a good pic of a 518 2WD factory 90-94 truck.