mopar4x4stroker
Member
Hey, new guy from ND. Im curious to hear you guys opinions on a milidon tray for a hyd flat tapet 408 on the street with stock pan and HV pump? Would it be wise or a good Idea? I already bought it but not sure if I should run it or if it'll even clear a 4" crank(iIr it will). I heard windage trays aren't good for a flat tapet street motor that sees alot of idling since the crank splashes oil on the cam. The reason I bought it was cuz the original build was going to be a roller but funds changed. It'll be internally balanced cast scat crank so I'm also concerned about added rotational weight. Then again it wont see the other side of 5,500-6,000 rpm. Being its cast it still concerns me though. Another thing thats a concern is a sucking the pan dry w/o the use of the tray. My 318 has a HV pump but its never seen past 4,500 rpm, another 1,500-2,000 rpm might tell a different story. Whats your guys thoughts