Recent content by Tim Ziegler

Interesting. My 84 Prospector is tilt and uses 2 holes for pulling the steering wheel. After putting 5/16-18 helicoil threads in I was able to pull the wheel. It took about 12 'wop's with a 4 lb bfh to pop the wheel loose. Without the hammer effect those threads get pulled out sometimes.

Did some steering wheels take 5/16 and some take 3/8... Mine ia a 84 Prospector with 4 spoke 'Tuff' style steering wheel

WOW, my Ram is 84, 2 threaded holes which I think have shot threads. 5/16 bolt size I think. Needs helicoil job

Gotcha. Understood. Take care 7

Thanks 7, I appreciate it

Do I use metric bolts with the puller...no bolts fit the holes. So far I've tried 5/16 bolts and they don't work. Looksd like coarse threads in there. I'm lost. Thanks for any help gang

The 2 year ''choice'' makes it interesting. As far as ram air tubes and the pick ups, I think 81, 82, 83 and 84 the hose from the air cleaner snout goes to the pass side and 85 on the hose goes to the drivers side if one cares about such trivia

Ok, then it seems the ram air elephant trunk can go to pass or drivers side on any year. Thanks for the help

I don't see any consistancy from 78 through 89. It seems you could get 2 square, 4 square or 2 round any year

I don't see any consistancy from 78 through 89. It seems you could get 2 square, 4 square or 2 round any year

Thanks number 7

It works but I have to be persistant and hit set 10 times and same with resume. Any ideas out there would be great. Turn signal switch, control unit under hood, what should I try first

OK, thanks

With the shock mounts, it still has leaf spring plates? Your price is good. I'm looking at shipping to Minnesota. The shock mounts would be rubber insulated in 76 I spose

What is the leaf spring plaste application, what rearend. Shock mounts, I'm ignorant on them