Recent content by restore 3

Hi Joeychgo! nice work on the site. can you tell me how to find the photo gallery?

Do you have a bed that fits '79 step-side? with tailgate, by chance?

:plane::noidea:Time wait's for no man.....and yet another year of snow plowing and not a new part bought for restoration!!! I just cant seem to get this project off the ground!!! I'm keep'n the faith though:pray2:

:lock1: the rebuilt motor blues....Pristine shape '99 S-10, Body looking right at 200,000 miles, inside and out beautiful, just put a rebuilt crate motor, 3 year warranty/100,000mi, .......How bout 20k miles and 3years 3mos. !!!!!!!! Rod bearing! Company said .....see Ya!!!!! What a shame, nice...

The answer has probably been posted 1000 times, Rocker Panels for 78-79 stepside w100? I'm looking for quality and fair price. May I have some good input on this, as I know EVERYONE has/had the Rocker Rust Out Blues at one time or another. Last time i fixed rocker panels I used a full can of...

I like this idea and I bet it saved alot of time/money! While my rockers are shot I think I'll use your method here to re-extend the supports to the rockers. thanks!

Thanks again for the info. The fluid, bolts and the data on the axle housing and vacuum line and sending unit all make sense and while I dont have that CAD axle, I can tell you that putting the wire on the sending unit BEFORE installing the T/C would have been a good idea! lol I'm prepping for...

Havi'n fun Now! Yep bear, it sure seems that way. I didnt look at the axle before I got on here so I'll look in the AM. The case went in without a hitch however 2 other issues appeared. 1st- the bolts to from the front driveshaft to the t/c looked at first to be 3/8". But when dry-fitted with...

Thanks Friends, Here's what I found as far as the transfer case, and I will take any and all help. The tag on the old one (busted case) is 208D so I checked the years and that model # was made '80 to '89? And I have front locking hubs, and to make it all even more interesting it has 8 bolt...

Is there a difference in transfer cases on a '79 W100 with a manual or auto x-mission??

Thanks to all, I do have it running but at full speed only. Thats ok for now. The above mentioned box of parts that came with the truck had a resistor, a blower fan motor, and the bezel for the dash that goes around the heater control switches. The previous owner must have been to a yard cause I...

I did get a box of used parts w/truck when I bought it including a heater blower and a reistat that when hooked up is stuck on low fan speed? If the old fan needs more persuasion again I'll swap it out. We will see maybe tomorrow if I get snow here!? Previous owner knew something was wrong.

Thanks! Nailed it, after looking further into the fuse box area I noticed that the fuse holder clips were melted! Time for the ammeter bypass job. Found the resistor is shot cause its stuck on high speed when I finally got it running. The fan turned but needed persuasion, good rap or two with...

Hi everyone, Im sure its been posted before, Heater blower in-op! No A/C on Truck, '79 W100. Switch does nothing but heater core is hot so the coolant is doing its job. The Fan, she just ain't spinn'in! Fuse good, whats next? Now before I start replacing parts where can I use a tester or...

It is a version of the li'l red x-press, I don't know all the options but it came with the same custom wood outside and the steak body type wooden sides, but was painted black. Midnight Express decals I think the midnight and the warlock were 2 different models ? Anybody?