Search results for query: *

I am a GM fan, but there are a few issues to be aware of. Depending on the year the engines are, they are either LS or LT based, both can have DOD. I am not a DOD fan, it can be turned off with a plug in module, or tuned with HP tuners to shut it off. The DOD lifters can be an issue. I believe...

It has been really dry here lately, but yesterday afternoon and overnight we finally got some rain. Only about a half inch, but I will take it. It was so dry and the pollen was hell on my allergies

Rain yesterday afternoon. Today the sun came out and it was in the 80's, I got my lawn mowing caught up. I hope you all had a great memorial day

Look on Car-Part.com

If I am not mistaken, you can get the part number off the PCM with the scan tool

The week started out too hot for May, two days in the 80's, but by Wednesday it was in the 50's, 60's for Thursday and Friday. Today I had drizzle all day and temp in the 50's. I wanted to mow, but I have tomorrow or Monday to get it caught up. Have a safe Memorial Day

If the axle isn't worn then your good. You will see where it rides on the bearing, any pitting or wear will be seen. Look for this Two examples of what you don't want.

It has finally stopped raining here, parts of the northern lower peninsula of Mi has had flooding because of the rain. We have had a lot of water around me, but it's been draining good. The thunder storms that we have had and the warmer weather has everything getting green. Mowing season is...

I had this 2012 town & country come in, it had some starter noise and a slight vibration at idle. I found this Usually they make a lot more noise

We had a lot of rain last week, temps are coming up, but more rain forecasted for this week. April showers I guess

I am partial to GM, the 2500 with a 6.0L is good, it will pull what you want, but they like fuel. Ford F250's with the V10 seem good, the 5.4 3V can have issues, later 6.2L seem decent also. Ram 2500's with cummins diesels are good, some can have trans issues

That is ugly, looks like the coolant may have started to become acidic

This week started with spring type weather in the 60's and finished today with 30's. Snow this morning that melted and now wind blowing 20-30mph with gusts over 40

I got the plow frame fabricated and installed last November before the snow started for the winter. I used my plow frame from my 98 2500. I painted my rear window cage before installing it. I swapped the wheels over from the 98 also. Here it is I need to replace the plow markers and make...

I have had a few interesting Mopars recently. First one was a long time customers 1988 B250 custom van, it needed a water pump. So while I was in there I decided to pull the timing cover also because of the fear of the gasket being disturbed from pulling the water pump. I put a timing set in...

It was 50 today, but cool down coming tomorrow with the chance for some snow. Winter isn't over for me yet

It's been a while since I have been on here, another frosty morning here in MI. The days have been in the 50's with 30's over night. I am getting my plow truck ready for what's coming in the coming months

Start by looking at the grounds

The first part of the week was brutal, hot and humid. It cooled down some Wednesday and went back up yesterday and today. 80's with humidity. I have some work to do outside, so I hope the humidity goes down

Welcome from the Mitten, spent my time in the Air Force at BAFB in Bossier City. Sharp truck