Search results for query: *

Remove the line where it's tied in, usually at the master. If it has a tee, remove it and put the original line back into the master. If not get a line nut or plug to cap off the line

If you want a column shifter, you will need a different column and the linkage. You will also need the TV linkage or an aftermarket cable kit. Like the one from lokar. You could go with an aftermarket floor shifter. I have seen guys talk about lowering and the B van lower control arm swap seems...

I believe the issue is in the speedo head, it still uses a speedo cable doesn't it?

It's ok either way, cut it off or leave it. It won't catch fire

In the 70's today and the humidity is down. I need to mow my grass. I had too much going and now it is getting long

Did you do a google search? I saw a few different guy's ask the same question on some other forums

Saturday was hot and humid. I got the church mowed and then I went to turn the rotors on my wife's new to her ride. Turned the front's, lubed the caliper slides, took the rears apart and the pads fell apart. Turned the rotors, replaced the pads and lubed the caliper slides. Took it home and...

Yesterday it rained most of the day, really hard at times. I don't know for sure the totals, but it was forecasted 4-6" of rain. Some areas had flash flooding. Today was sunny and high 70's

80's today and humid. We had a softball game tonight and it was still humid, at least it didn't rain. At times it looked like it could though

I don't work Saturday's so the boss decided to close Friday giving us a nice long weekend. Thursday I kinda just sat around and didn't do much, then the kid's came over and we cooked out. Friday I mowed the church in the morning then started putting the engine back together in the Encore. It was...

Wiring it straight through works, I have seen people drill out the connector after removing he offending pin and push the wire through

Saturday was humid and temps in the 80's. I did get the car torn down. 15 Buick Encore 1.4, found a cracked piston and lots of play in the turbo. I am going to order parts tomorrow. I was hoping to get everything so I can put it together next weekend. Cool down today with a high of 69

I see what your talking about, but I don't know enough about them to tell what else wrong

Yesterday was 69, today was in the 70's. Nice change from last week. Thunderstorms for tomorrow with temps in the 80's. I have a car to work on at the shop, so I hope it's not too humid

7mopar suggested checking the ammeter, check power on both sides of it with the ignition on and off

Did you check the voltage on the firewall side of the bulkhead with the ignition on? I know you checked there first, but check it with the circuit loaded and connected

Yesterday was humid again, temp in the 80's with humidity in the 90% range. I did a water pump and timing belt for my buddy's son in law on his 09 Eclipse and man was it hot in my shed. I did the job 3 1/2 yrs ago at work and the water pump failed with 25,000 on it. I can get the parts...

I woke up this morning to a thunderstorm, it was done by 7:30. Temps hit the 80's, summer is here

Does it have a fan shroud? Check your ignition timing, retarded timing can make an engine run hot

The week started hot and humid, temps in the 90's, late Monday afternoon a thunderstorm rolled through. Lots of branches down, a couple houses in town ended up with trees on them. Yesterday and today, still hot and humid temps in the 90's, but it's supposed to cool down a little, 80's with a...