My truck has the 4 speed granny low trans already. Honestly I figured the truck engine would be more common in the junkyard Incase of needing parts. I’ve been trying to find a v10 truck but they want money for them. I’m a 2wd guy and so far finding a truck that has the 10 with a manual in a 2wd...
85 half-ton 2wd. The viper doesn’t share anything with the truck sadly. I’m thinking if I could find a 5 or 6 speed to get behind it I wouldn’t have to worry about the trans blowing up from the torque. Do you know of any differences between the Cummins and the v10 bellhousing and clutch...
I was going to see if anyone knew what year/years were the best to get one of the v 10s out of the 2500s. My 83 was totaled by a texter. I dont really care for fuel mileage itll be one of those nice to have but not need things to tinker with. im not looking to build power or race. I seen someone...
Awsome info man thats what i was looking for.
7Mopar Thanks for the heads up. ill have to check for space and see where the new fuse block is going. see if i cant rig up something fancy
Its going into an 83 d150 318 2wd auto. I have to redo all the wiring through the whole truck and the engine bay is where i want to start. I found a few 6al ignition kits pretty cheap and i had a guy tell me that you can do a 1 wire set up for them. I had an issue with the truck not running last...
I’m wanting to get a parts list going of what all it’s going to take to convert to the hei. Parts list. Drawings. Tips. Threads to a site that has done it. Anything would be awsome. It’s a 318. Don’t know it that matters. Tia
Hey guys I am going to be redoing my papas front end. He wants the tie rod ends ball joints rubber bushings etc. I was going to see if y'all knew of a full kit on a website or if eBay would have something with a little more digging? I know that there are websites for after market stuff but he...
I know on the fuelinjected 318 they don't have a weighted flywheel apposed to the 360 which are due to the way the engines are balanced but I think the 318s are internally balanced? Thanks for the help 7mopar.
I didn't measure it out but I didn't think it would but I also forgot that the 46re trans is computer controlled so I don't think it would work without the magnum engine in it. Unless you know of a way?
I don't think I would trust it because it might have cracked the block/heads from freezing or the freeze plugs could be cracked or busted. It might be more than just swap and rock...
Me personally I would check to see if it turns over by hand if it don't I wouldn't mess with it. But that's just me. Check to see if it had oil sitting in it and if it looks like it had water sitting in the oil. Look it over real good. If nothing else rebuild the one you have in the truck. The...
I thought the same with my 97 but the guy I bought it from had put a junkyard engine in it. She's got 368××× and still spins tire. If you're engine still has that much power you must have gotten a good one. And I think from 94 to 01 the engines were the same bolt pattern. And that oil leak could...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.