• Welcome to For Trucks Only !

    We are a community of American Brand Pickup Truck and SUV owners. Join now! Its Free!

Any Model builders out there?

Okay! '67-PW. is it a 1:25th. Scale or 1:18? You sick "Bast@rd!" Didn't know people in rhe good old U.S.A still build models! But not just any "out of the box model" but a well executed, highly anal-retentive, "CUSTOMIZED!" model.
Bro! that's what I do... I specialize in 1:35th . Scale military dioramas... Granted, haven't build one in about two decades, you know, wife, kids, bills, work. That's why I'm simplifying my life.
Bloody incredible work!

Most my models, as you'll see are 1/25th, with a few 1/24th mixed in (only scale I could find that particular car or truck in) I also model 1/87th too! BUT I got a HUGE 1/16th '69 Dodge Charger "General Lee" I plan to let 'er rip on detailing it and making it as close as I possibly can, as I'd love to get it autographed by Miss Daisy Duke herself andeven both Bo & Luke if they do another "Reunion" for the show......

You think I'm a sick bastard, shit, WAIT................. you've seen NOTHING YET!!!!!!!!!!!!!!
 
Most my models, as you'll see are 1/25th, with a few 1/24th mixed in (only scale I could find that particular car or truck in) I also model 1/87th too! BUT I got a HUGE 1/16th '69 Dodge Charger "General Lee" I plan to let 'er rip on detailing it and making it as close as I possibly can, as I'd love to get it autographed by Miss Daisy Duke herself andeven both Bo & Luke if they do another "Reunion" for the show......
You think I'm a sick bastard, shit, WAIT................. you've seen NOTHING YET!!!!!!!!!!!!!!
Can't wait bratha! Damn! This FTO site and forums has got my "juices" flowing again, it's like virtual 'Viagra'.
 
You sir are a man after my own heart, I build nothing other them "MoPar" models...... I also mold my own parts..... SO if you got some "rare" MoPars" engine parts, I'd LOVE to mold them and supply you with a few just for allowing me to use your part to make the mold!

Alot of parts in this truck are from my own molds! Then whole motor I think I molded! I'd have to go and look at the pics to be sure..... I KNOW the valve covers I molded AND I chromed them! -Was told you couldn't "chrome" resin plastic..... Yeah, I'm hard-headed that way!
Can I get in on this deal? I'll do leg (finger) work to distribute your 'highend' individual pieces. I ain't kiddin!
 
Can I get in on this deal? I'll do leg (finger) work to distribute your 'highend' individual pieces. I ain't kiddin!

We may have to take this to PM LOL, MAYBE even over the phone!!!!!! -Ain't kiddin' either....
 
Anyway for all thats following along...... Here comesthe "father" trtuck in my set, also like the first one, being based and built from a real truck I once had, this "father" truck is being built from a real truck my Dad owned, about the same time I was making the '78 Power Wagon, in real life....
 
Now, as I have mentioned in a few postings during this build, my Dad's truck was next, to follow suit much the same manner as this one. WELL, a few slight

differences between the 2 trucks. One, Dad's was a '79 Dodge Adventurer 150, 4x4. This truck had a Mopar small block in it, I myself can not remember if it was

a 318-2 barrel, or a 360-2 barrel, or 360-4 barrel. I'm just NOT sure! The nice part is, stock from Mopar, the engines looked exactly the same from the outside!

EVEN the carburetors! The Carter 4 barrel was the same as the Carter 2 barrel, the difference was inside, the 2 barrel had the locations "closed off" and no

venturi's in it. Where that same spot was opened and had the venturi's in place for the 4 barrels! (Interesting) but that made them use the same common

"casing"!!!! SO with that said, I began, getting the motor together, parts and such during the 2 last sessions on my truck only to begin building assembling

that engine while awaiting decals to dry.

1979_Dodge_Adventurer_150_000_detail.jpg


1979_Dodge_Adventurer_150_001_detail.jpg


1979_Dodge_Adventurer_150_002_detail.jpg


1979_Dodge_Adventurer_150_003_detail.jpg


1979_Dodge_Adventurer_150_004_detail.jpg


OK, thats the Mopar Small block. I will not say what its gonna be till I know for sure, I have to ask around to make sure of this. BUT it won't matter TILL I do

the air cleaner on it, OR the valve covers. I'm not sure if my Dad had used Chrome valve covers, OR left them blue stock! I also don't know what air cleaner it

had so, I'm leaving that detail off till I know for sure (I have to talk to my uncle and cousin to find out as they both would know. I simply can't remember. I

was to busy at the time working on my own truck so..... BUT, my Dad was always at my uncle's with his truck and doing stuff together on it, as they both were

working on their trucks in my uncles garage, as my Dad had his, and oil changes and such regular tune-ups, and the uncle literally building a '70 Chevy C-10 at

the time (I remember that truck pretty well, my cousin loved that truck!) BUT I have to talk with him to find all this out BUT I can get the start on it, to the

point of "labeling" what the engine is, HECK, I don't even have the valve covers till I know for sure.

Needless to say, thats ALL I got for now, I have to do some talking on the phone before long to get this one under way to know what and where I'm going with it,

BUT, thats a start, I can however get the frame going till then as thats going to require some time invested in it to get it to hold the engine anyway,

so.......... I'm not 100% stuck on this build, or well till I at least talk to my uncle or cousin on Dad's Dodge back in the day!
 
Ok for all thats following along, here are those pictures I promised!

Now as you read with my typed "update", I was removing parts from a glue bomb, frame, to have the needed 4x4 suspension for this truck. WELL that frame so far

so good, has supplied me with both front leaf springs, and axle, as well as partial "steering" parts (I'll be doing some custom work), on the steering detail as

I did on the frame thats going under my truck in this build.....

ANYWAY, the donor frame for the model was/is gonna be used else where on another build due to it being "styrene" my Dads truck however being bone stock, can use

the more difficult frame to work with thats resin for strength sake..... (the styrene frame will have MAJOR modifications to it), for the truck its going to be

used in (my Railroad truck) that you'll see again in the future!

So, without further ado, heres that glue bomb frame I was salvaging parts from:

1979_Dodge_Adventurer_150_007_detail.jpg


1979_Dodge_Adventurer_150_008_detail.jpg


1979_Dodge_Adventurer_150_009_detail.jpg


Firstly, if it had been "painted" it would have made severing the parts a bit harder to do, BUT this junk frame looked as tho the whole truck was assembled with

no paint! (In my favor!) BUT, wasn't a complete truck when I got it, all I got is what your about to see!

The front suspension isn't in to bad of shape! I can work with it. I did however remove the tie rod, going from side to side, the crank journals to make the

wheels "steer" were left in place, I think I can work with them, we'll see. I also noticed A LOT of glue seams needing "filed" smooth, that will be seen in just

a few pictures! BUT upon severing this front suspension, one of the leaf springs broke, (I knew it would I noticed the crack looking at the frame at one point

so...) I was ready for it, and armed with Tenax 7R!

So, then this is what the parts looked like being removed:

1979_Dodge_Adventurer_150_010_detail.jpg


Can't even tell where the leaf spring WAS broken! Anyone see it?

This same frame ALSO donated to me the rear suspension, it however was in much worse shape! REMEMBER this "donor" frame will be extremely hacked up in the end,

BUT its going to be used in another extreme build when this Father & Son set are done! The styrene will make the glue joints easier to do, and much stronger,

Dads truck however is bone stock, I won't need to do any "lengthening" to it to keep the frame straight or strong so..... The hardest part on this one will be

adding the inner fender wells! THOSE will come from a "Little Red Express" truck NEW frame, that would have gone under the truck originally! With a short step-

side bed!

1979_Dodge_Adventurer_150_011_detail.jpg


The back suspension, BOTH leaf springs were broken in 2 places, and the rear wasn't EVER glued really well. AND upon removing the drivers side leaf it came

loose from the rear. (NOTHING was glued real well on whom ever assemble this truck when it was now.....

Coming up next, is the "NEW" resin frame! Stay tuned! More to follow these short messages!
 
OK, so now you all have seen the "Donor" frame, and the fun I had with it.......... NOW comes that resin frame all that removed, and rebuilt suspension will be

going on!

1979_Dodge_Adventurer_150_012_detail.jpg


EXACTLY the same frame, BUT its missing a few vital parts, It needs a gas tank, and both inner fender wells. Other then that it looks just like the frame thats

in the Little Red Express, only longer! And missing details, this particular frame however, like I have mentioned, is resin! SO, who ever "cast" it, didn't do

to bad, but, I need to add inner fenders (I think they removed them, to make molding easier!) BUT, the fuel tank the master copy NEVER had it.... SO, as if I

remember correctly that was an added part in the kit (you had to glue it in yourself!)

1979_Dodge_Adventurer_150_013_detail.jpg


A few resin mold "bubbles"? -YEP, thats one way to tell resin from a glance!

1979_Dodge_Adventurer_150_014_detail.jpg


The "engine bay" in the frame, needed "opening" was a fine thin sheen of resin here, like an onion skin, this was made with a 2 part mold! Thats where the 2

separate parts, separated! (say that 3 times fast!) As you can see, I also had to open the little section behind that transmission cross member as well. Along

with I had added a "pad" to mount the trans mission too, as the original truck had a half breed 360 - 440 in it, and the transmission was a

bit.................bigger in diameter so, I needed something to bring the tail shaft up on the transmission, and I had to get the front mounted as the stock

engine mount (just like my other frame in this build, would not work "as-is" so.....

1979_Dodge_Adventurer_150_015_detail.jpg


I have to make 2 completely different engine mounts per truck due to one being/having a Big Block in it "Mopar 440" and then the current one having a small

block in it, "Mopar 360" SO, yep its the same way in real life too the mall block engine mounts are a bit longer and a bit more, pushed up, to meet the block,

where the big blocks were pushed down to meet the block in about the same manner, just higher on on and lower on the other due to "deck height", the mounts

weren't on the same "plane" from the big block to the small block and they compensated this by length and placement of the mounts on the truck frame!

1979_Dodge_Adventurer_150_016_detail.jpg


Over-all look of the frame upside-down!

Notice closest to you lowest part of the picture, that frame rail, NO gas tank attached to it!? The truck this was molded from, I am not sure if it came with a

glue on detail part, or simply did not have a fuel tank on the frame rails, (IT certainly could have been behind the seat! BUT I'm not 100% certain on that

so.... I KNOW where the step-side tanks were however (I've owned several), and got one even today.....

1979_Dodge_Adventurer_150_017_detail.jpg


Just the other side! This picture is the one that would show how the tank would be again the furthermost away frame rail!

A few more to follow, STAY TUNED!
 
SO..... I got the suspension on the way, I got the frame almost ready for it, and then it comes down to "stance" this was and has got to be a STOCK height

truck, thats how my Dad had his THAT I do remember, Problem being, is will it work? I kept as much as I could "stock", BUT could I pull it off with the tires

and rims I had? NO, I got a bit more help from yet again Vince! (Thanks man, you have not idea how much hide you been saving!) LOL

He sent me these:

1979_Dodge_Adventurer_150_020_detail.jpg


The 4 in-line tires are those Vince sent to me..... These are the best ones for the size I recall and my uncle speaking about over the phone the other night.

The "singled out one" is ratty, and will be used NASTY side hidden as a spare tire! -Just to get rid of the thing! Its the only one I have and its plenty good

on one side for a spare!

Then, I haven't mentioned rims..... They too were traded to me by Vince!

1979_Dodge_Adventurer_150_018_detail.jpg


1979_Dodge_Adventurer_150_019_detail.jpg


These rims, well IF my memory serves me right, they seen 3 or maybe even 4 Dodge trucks my Dad owned! WHY he loved them, I could not tell ya, BUT I know he

did..... I know at least once he had them sand blasted, and powder coated! Never to need much upkeep after that, they STILL exist today, on the '84 Dodge Power

Ram my cousin got that was also one of my Dads trucks! (thats how he got the rims!) My Step-Mother sold the truck to him AFTER Dad passed this past spring. As 8

vehicles is about 5 to many for her! LOL I just wished I was closer, I probably have that truck too I lived closer! BUT they were white, gloss white on a gloss

black truck. They had I believe a red and blue stripe in them originally till Dad had them powder coated then those were gone, but.... they still looked pretty

good!

THEN, last but not least.....

1979_Dodge_Adventurer_150_021_detail.jpg


A picture of the cab, and the straight bed..... This is what Dad's looked like..... Imagine it black, 4x4, stock height, white spoke wheels, stock tires, and if

I can find something once in awhile a bed cover NOT a "tarp" but like a top over the bed, with whatever you can imagine in the thing he was ALWAYS hauling stuff

for himself or others so..... At times seems as tho he stored things for short periods of time too.... In the summer however the bed got cleaned out, and the

top was removed, and used to haul but not to "store" for any length of time. -Thats a part, I'm not sure ANYONE makes (at least I haven't seen any)
 
I got to looking at that old Donor frame, that I'm trying to save as its styrene for my Railroad truck build as I'll be doing extensive frame work to it for

that model, BUT I was more interested in the suspension to go under my Dads '79 Adventurer 150...... SO, I seen that the crude steering details they at MPC made

way back when, it was good for the time back then, BUT, I thought I could improve upon it....

Went from this:

1979_Dodge_Adventurer_150_009_detail.jpg


Removed from the styrene frame.....

1979_Dodge_Adventurer_150_010_detail.jpg


Better view as the part itself. I think that steering tie-rod, could be improved in detailing so, I went on to do a bit more then just replace the missing "rod"

MPC had originally with the part.

Heres what I made it to be:

1979_Dodge_Adventurer_150_022_detail.jpg


Right side up, removed from the leaf springs, for detailing and height adjustment. I also added the drag link that would connect to anther rod that goes to the

power steering, this detail wasn't even one the model, I made it myself, and added it from pictures of a real Dodge Adventurer truck! -It is a bit different

from what I had in my Power Wagon! I knew there would be differences, BUT I tell you all, theres a bit more building these 2 trucks then I ever thought in the

beginning, more then just the exterior, and interior...... AND even the motors!

1979_Dodge_Adventurer_150_023_detail.jpg


Notice, I removed a bit out of the mount where the rear mounts to the leaf springs! to lower the stance a bit, as my Dads real truck didn't appear "lifted" and

left this part of the model alone, it would have made the truck look "lifted" BUT, it also wasn't "lowered" either, altho, thats what I've sort of done here, is

lowered the trucks frame and body over the tires.... NOT a "low Rider" but more of a family truck sort of height!

1979_Dodge_Adventurer_150_024_detail.jpg


Same front axle, flipped over looking at the bottom! I got to paint this thing an getting it ready BUT I may as well get as much detail on it as I can before it

gets painted!

More to follow right after these short messages! ENJOY!
 
So as I mentioned, I didn't get "A lot" done, BUT what I did get done was pretty intense. I got the front axle ready for paint, and some more details, BUT I

also got the tires on rims, and some detail done to them as well!

1979_Dodge_Adventurer_150_025_detail.jpg


White spoke wheels, on the times as I pictured earlier..... Looks really good! I got to add chrome lug nut bolts yet and the front set of wheels needs to have

some sort of lock-in, lock-out hub assemble done to the rim but other then that the set of 4 look really good! (I have to also make a spare), BUT with a white

steel wheel on it! -Which is coming too! I got a spare steel wheel to use, I just got to do a little detail work to the wheel and then paint it white!

1979_Dodge_Adventurer_150_026_detail.jpg


A little different angle and a bit closer.....

1979_Dodge_Adventurer_150_027_detail.jpg


NOW comes the fun! Flipped over tires! Top 2 side-by-side are the front tires, and the lower 2 side-by-side are the backs! The top 2, have disk brakes, (rotors)

as you can see, with calipers, the rotors, and calipers I MADE! The caliper has a hole drilled in it to except the brake line and fitting! BOTH sides drilled to

have the caliper behind the axle center, as the real one would have!

Then you can see the rear tires with DRUM brakes, Again, the DRUMS I MADE! I have yet to drill them for the brake line and fittings!

1979_Dodge_Adventurer_150_028_detail.jpg


Being "pre-made" these ALL will be "directional" to the truck! I want to get the wheels and tires on the axles this time BEFORE the axles are mounted ot the

suspension, to adjust the height of the truck accordingly to what my Dads would have been! Building this way, will allow me to do that, AND add as much detail

as I can just like I did my model of the truck I was building way back when.....

Next part to be handled is the rear axle! A bit of work needs done before I can get to where I am on the front!
 
A few more "updates" on this build..... Not much, but something, something meaning a bit of "small"

details ready to go! I too kit upon myself, to make my own "power steering" on this model just I did on

my truck in this build, as the kit, neither of them, came factory or stock with such, and me, being me, I

LOVE details, so I just HAD to add it! With that being said, a part that came from the stock pil 'O parts

I got, I salavaged the lower power steering, that leads to the drag link.

1979_Dodge_Adventurer_150_029_detail.jpg


Granted, as you can see the white is the power steering "housing", thatn I had to remove the steering

shaft from one end, and make it go on the other (NOT added here), withthat, I needed to make the drag

link, which is that metal "dog bone" detail seem here as well as "pin" it to the steering box, and have

some sort of "spacer" as well, which is out of a necklace kit I bought for numerous detailing uses....

Fittings, spacers, you name it.

1979_Dodge_Adventurer_150_030_detail.jpg


Same thing different view. To show "depth" of the detail in itself. It will be mounted OUTSIDE the

drivers side frame rail! As you'll see. Remember this truck is a bit different from the common "Power

Wagon" we all know and love!

I got a bit done/added to on the frame as well. I went and am still working on the rear suspension to get

it "level" as it was all broken up.... NOW however its being done with heat! As they're solidly, mounted

in place on the frame for the rear axle! BUT, I got to thinking AFTER mounting the rear leaf springs,

what about the transfer case!? Hows that going to "sit" on a "low" 4x4 truck? As the actual model itself,

seems to have been "lifted" and I brought it back down to "family 4x4 truck" standards.... I did NOT want

the transfer case to sit so low that it was barely offthe ground, BUT to sit in such a way, it wasn't to

far up in the frame to cause alignment problems to the cab with the interior tub. SO, I got to looking a

bit and needed to make some more modifications, to the frame.

1979_Dodge_Adventurer_150_031_detail.jpg


The dark gray part is the transfer case mount. The whole square inside the frame rails, and the
webbing" between the cross members had to be removed. As I needed the thickness of the frame to get the

new transfer case mount in it! And "high" enough to look right. I even went as far to relocate the

transfer case "cross member" mount, to the HIGHEST location of the locating blocks on the insides of the

frame rails. To look as an "angle" mount from the cross member part of it, (if any of this makes sense)

1979_Dodge_Adventurer_150_032_detail.jpg


Then while messing, I went to "sturdy" up the rear leaf springs. These things were/are brittleas they're

old, and I MEAN OLD, and were from a Glue bomb I mentioned I got for mere parts.

1979_Dodge_Adventurer_150_033_detail.jpg


A LOT of little things, to allow me to move on to the bigger things.....

MORE to come just after these brief messages!
 
Now, a LOT of really little work all on one sub-assembly of the truck. The front axle! Brake lines, hard

line and hose and fittings, you name it. I made my own front disk brakes with added calipers from another

glue bomb I had.... All to be put together on this truck to make it look the part. Just like my Power

Wagon, earlier in the build, I had to make A LOT of the axle parts myself, as I do not think nor believe

details as such are even made for us in this hobby BUT, I'm not complaining, I'm saying it as I enjoy

seeing just hot far I can push myself, to make different details like this!

1979_Dodge_Adventurer_150_035_detail.jpg


Passenger side tire, rotor, brake, all the lines and ALL the fittings for that side, as well as brake

line "hard line" to mount made and placed on rear differential casing.... The "hard" brake line in

silver, has a mid-line "T" fitting to have the line front the master cylinder come down to it from a hard

line ALSO to have a fitting to have a hose to meet this "T" fitting...... A LOT of "line-work", hard

piped, and fittings to hose and such..... the "hose" you'll see from me, won't be "braided" its all as

factory in this builds, as "rubber", right to the brass fittings that I make myself!

1979_Dodge_Adventurer_150_036_detail.jpg


Just the other side....

1979_Dodge_Adventurer_150_037_detail.jpg


Same side bit better view maybe..... You can see my rubber brake line hose from the hard pipe on the

rear, to the caliper on the rotor!

In these views, you may be able to also see, the "mount brackets on either side from the ends of the hard

pipe to the hose that goes to the calipers..... The hose is needed for the knuckle movement of the

steering axle.

1979_Dodge_Adventurer_150_038_detail.jpg


A bit better side-to-side of the axle, showing a good view of the mid-line "T" that will connect to a

hose that goes to the master cylinder.

1979_Dodge_Adventurer_150_039_detail.jpg


Over all view..... Not to bad for a couple hours work! Front axle is ready to be installed on the truck

frame! BUT I have to get the rear one in the same shape first as then after that comes the shocks to the

suspension, for the front. (Those shocks I didn't use on my truck), may come into use on this truck

remember this one is stock height, my truck wasn't stock height! -We'll see!

I'm pleased so far! More to come as I've made progress!

ENJOY!
 
So as I promised, MORE progress has been made..... To start out, as you all VERY WELL KNOW by now, I have a few of these trucks! (3).... BUT because of the

difference from one to the other, I had to find ways to make things "happen"..... This is where it gets FUN!

I went and looked through the parts I had for the "stock" frame to the short step-side bed truck (I wasn't going to be using this frame on my "Dads" truck, I

did however use the stock frame on my truck!) BUT that was due to Dads having a long 8 foot "straight" bed (Sweptline is what Dodge called them). But anyway,

the frame on Dads truck I choose the resin version I had, as I need the styrene version for HEAVY frame modifications on the frame rails to handle a utility

bed. Meaning, the factory frame that came with my Dads truck model was of the short step-side bed, and wasn't going to be used on this particular truck! WHICH,

is what I'm getting too here.

That short frame, I needed the inner fender wells from it, to fit onto the resin frame (was resin cast without them) SO, I get out my handy razor saw, only to

find that particular blade too wide to make the cuts needed to remove just the inner fender wells, without "hurting" the frame all too bad (I want to save it

for a rainy day!) SO, off to look for a more suitable way to remove them, and went looking through my handy blade selection I have for thee ole Exacto knives I

got.... Found a "keyhole" type blade, thin and pointy at one end with some serious teeth on it. Will do the trick! I get out my pin vice, drill a hole just big

enough to whittle the keyhole blade, in through it to begin "sawing".....

Here is the frame, BEFORE I began all this:

1979_Dodge_Adventurer_150_040_detail.jpg


1979_Dodge_Adventurer_150_041_detail.jpg


Clean, nicely cast, it ought to donate well to the cause.....and it did!

1979_Dodge_Adventurer_150_048_detail.jpg


Left the frame a little bit of a mess (I'll have to clean it up), BUT it donated the inner fender wells I need for Dad's truck......

1979_Dodge_Adventurer_150_049_detail.jpg


BOTH inner fender wells, came off nicely, and I got one cleaned up right away to see what all might be involved, I'm glad I choose to do this the way I did, I

kept the donor frame for something later, and gained the needed inner fender wells for under the hood of my Dads truck in this build!

More to come right after these short messages! ENJOY!
 
-So, while I was thinking on how I was gonna go about the added inner fender wells, I got to thinkin', I probably ought to get that steering box on the outside

of the drivers side frame rail, as once the inner fender well is in place, getting to that or making the inner fender well fit, this be thee BEST time to get

that in place!

1979_Dodge_Adventurer_150_042_detail.jpg


1979_Dodge_Adventurer_150_043_detail.jpg


1979_Dodge_Adventurer_150_044_detail.jpg


A picture to show a bit of "depth" of the actual added detail:

1979_Dodge_Adventurer_150_045_detail.jpg


Then in these pictures I went ahead and did some fine "clean-up" of the edges around the wheel openings in the floor pan to take the inner fender wells without

a problem....

1979_Dodge_Adventurer_150_046_detail.jpg


The seen pencil line on the frame rail "side" is the location of the CENTER of the axle placement on the suspension, to center the wheel in the opening, and

center of the fender itself on the body, and be even on both the front and the back, spacing. This WILL disappear when the frame and underside is painted, BUT

will guide me, when I go to tape off the location as to where the axle will glue to the leaf spring, and allow me to glue it in place when the time comes. ALL

the mounting locations will be taped off before the frame is painted!

1979_Dodge_Adventurer_150_047_detail.jpg


EVERYTHING is looking good about now! SO, stay tuned! More to follow!
 
Then once I sat the frame aside, I began trying to "fit" the passenger side inner fender well in place on the frame. Only to find that the stock resin cast

opening, was to large to add it as I removed the plastic one from its frame. I wasn't going to cut the floor pan of the plastic one, in order to fit it here,

(be difficult to mud it in to look the part, SO, I went and added shim plastic to the inner fender wells, and a small section of angle plastic, to "glue" to the

adjoining floor pan! They look a bit rough, had filed the first one (passenger side) right after its removal and before the drivers side was removed....

1979_Dodge_Adventurer_150_050_detail.jpg


One filed up nicely and one was removed, and then this picture was taken!

1979_Dodge_Adventurer_150_053_detail.jpg


1979_Dodge_Adventurer_150_051_detail.jpg


Contoured GREAT, and corners "notched" to fit around the frame rails!

1979_Dodge_Adventurer_150_055_detail.jpg


Un-cleaned edges on the angle plastic mount..... BUT it is notched here too!

Then came the FUN..... The drivers side! REMEMBER I added that steering box? WELL because of my "detail adding ways" I had a fun time contouring this one, as

with my truck in this build, I added power steering lines from the pump on the engine, to the steering box, mounted to the frame! And whats stopping me from

doing that same thing to this model? Absolutely NOTHING! SO, having said that, I had to contour the inner fender well on the drivers side, to accommodate both

the power steering box, on the frame, AND the power steering lines from the engine, as well as the steering shaft from the steering wheel!!! I added that also

to my truck!

1979_Dodge_Adventurer_150_057_detail.jpg


It got that treatment as well as the added shims, and angle mounts on both ends!

1979_Dodge_Adventurer_150_059_detail.jpg


I have to say "contouring" wasn't too bad to get the inner fender well to sit in the same contour as the frame, the contour trouble area was where that steering

box was, BUT, I managed to get it to fit and look good all at the same time. MOST of this detail for mounting purposes, will disappear when the truck goes

together as the rear will be covered by the firewall, as well as the front with the radiator core support, and all the detail on it, BUT, is needed "extras" to

mount solidly to the frame!

1979_Dodge_Adventurer_150_061_detail.jpg


Front of the driver side fender well...... Cleanly done, and ready to be put in place!

More to follow!
 
OK now that BOTH inner fender wells were removed from the donor frame, and cleaned, and then sat up for installing, I got right to it.....

1979_Dodge_Adventurer_150_063_detail.jpg


Looking at it from the passenger side of the truck, you can see the opening in the fender well to allow me to add a steering shaft from the steering wheel, as

well as all the pipe work from the power steering pump on the motor.

1979_Dodge_Adventurer_150_065_detail.jpg


Looking from the drivers side.....Granted, BOTH these pictures show the "open" corners.... I have to go back and "fill" those in. ONLY the opening for the

steering will be open when all said and done!

Coming up next, is something NEVER done.... These 2 trucks had never seen each other unless in passing, I took the 2 models to see if the height from one to the

other was good for both trucks "stance"!!!!!

Stay tuned!
 
As I mentioned in my last post, I HAD to see what the stance was between the 2 trucks.....

1979_Dodge_Adventurer_150_067.jpg


My Power Wagon on the left, Dad's Adventurer on the right!

1979_Dodge_Adventurer_150_068.jpg


Under a bit more light......

1979_Dodge_Adventurer_150_069.jpg


I say, the stance is PERFECT, my truck was built to sit high, as it was, the real ones were about as you see these 2 models, Dads truck on the right, needs a

bit of work to get it where my Power Wagon is, BUT I think this is GREAT!!!!! Mine was was built purposely to sit high (I wanted to go "muddin' in it) Dad's was

a "family 4x4 truck" and sit at a high "stock" height as he added slightly bigger tires and rims to his.....

I'm VERY pleased with this work so far, on BOTH trucks! Got a ways to go on my Dad's, BUT it will happen.... I got to sit and detail up the rear axle for his

and then figure out its suspension as well as shocks for both..... Ought to be a fun task! SEEING these last few pictures of both trucks front-to-front like

that...... WOW!

As always, more to follow as things are done!

ENJOY!
 
Well after a bit of time and a good weekend to keep me out doors a bit, I actually got a bit done to the truck in the evening!

So, without going on an on, hows about a look see to what I did!?

1979_Dodge_Adventurer_150_068_detail.jpg


Seen here, all "clear coated" shiny...

Frame got painted, and clear coated! Sadly, however the paint on this frame is a bit "odd" looking. I think due to the frame being resin for one, and 2, the

paint when I went an cleaned up the air brush, seemed a bit "think" I guess, as it was left over from a pre-mix I done a while ago.... Was flat paint, and With

my dad he had "undercoated" every vehicle he owned so..... The frame got a slightly different treatment, I'm not sure what that was to consist of, BUT was flat

black as told to me by my uncle!

SO, with knowing that, I clear coated the flat black frame, and then allowed that to dry and went back and dry brushed dullcote onto the just the frame rails

and cross members.

1979_Dodge_Adventurer_150_067_detail.jpg


1979_Dodge_Adventurer_150_069_detail.jpg


Dullcote added to the frame and cross members!

More to follow these short messages!
 
Then while at that painting, on the frame, I got the steering box, painted and detail painted, all in the while AFTER the spray painting was done, as the

steering box would have been a cast iron steel color. Which, was unpainted like the color of a unpainted transmission (they're normally a matching color of bare

cast iron)

1979_Dodge_Adventurer_150_070_detail.jpg


Then a bit different view showing detail painting I did:

1979_Dodge_Adventurer_150_071_detail.jpg


1979_Dodge_Adventurer_150_081_detail.jpg


These 2 pictures show the gloss black bell crank that needs a ball joint, rod to go from the open hole, to the jointing, steering bell crank, on the axle

spindle....

I have yet to make this part.... This won't be made to fit till the axle is ready to go into place on the front suspension!

More to follow after these short messages....

Enjoy!
 
Back
Top